- ASTM D 943 – For Inhibited Mineral Oils ASTM D 2274 – For Distillate Fuel Oil (Accelerated Method) ASTM D 2893 – For Extreme Pressure Lubrication Oils.
- ASTM D-943 For Inhibited Mineral Oils – This test method covers the evaluation of the oxidation stability of inhibited steam-turbine oils in the presence of oxygen, water, copper and iron metals at an elevated temperature.
- ASTM D-2274 For Distillate Fuel Oil (Accelerated Method) – This test method covers the measurement of the inherent stability of middle distillate petroleum fuels under specified oxidizing conditions at 950C.
- ASTM D-2893 For Extreme Pressure Lubrication Oils – This test method covers the determination of the oxidation characteristics of extreme-pressure fluid lubricants, gear oils or mineral oils.
- Common Constant temperature oil bath, Inner stainless steel outer powder coated.
- Six place model with flexible flow meter choice.
- Equipped with oil immersion heaters, circulatory system, lid with six openings to receive 6 test assembly drain cock.
- Temperature range above ambient to 180°C, +1°C. Rating 2.5 kw.
- Flow meter arrangement consisting of 6 flow meters with needle valve to precisely regulates Oxygen flow rate at 3 L/H with an accuracy of +0.1 L/H. The assembly conforms to ASTM D-943. (Oxygen cylinder not provided).
- Flow meter arrangement consisting of 6 flow meters with needle valve to precisely regulates Oxygen flow rate at 3 L/H with an accuracy of +0.3 L/H. The assembly conforms to ASTM D-2274. (Oxygen cylinder not provided).
- Flow meter arrangement consisting of 6 flow meters with needle valve to precisely regulates Compressed Air flow rate at 10 L/H with an accuracy of +0.5 L/H. The assembly conforms to ASTM D-2893.
- Set of six Oxidation cells consisting of six test tubes, six Oxygen delivery tubes, six condensers, all conforming to ASTM D-943 ASTM D-2274.
- Set of six air delivery tubes of 41 +0.5mm inside diameter and 600mm in length with slotted corks, all conforming to ASTM D-2893.
- Accessary pack : Two support rings, sampling tube holders, sampling tube spacers, stainless steel sampling tubes, stoppers and oil level indicator strips.
- Low metalloid steel catalyst wire (1.59mm dia) cut in 3 mtrs length pack of six.
- Copper catalyst wire (1.63mm dia) cut in 3 mtrs length pack of six.
- A set of six electronic digital temperature indicators with PT-100 sensor and clamping to indicate cell temperature.
- Diaphragm oil less compressed air pump to use with ASTM D-2893 test.
- Power supply : 230 +10% Volt AC, 1 Phase, 50 Hz.
Related Products
NHG268 gloss meter features with 20, 60 and 85° angle, manufactured according to ISO2813 and GB/T 9754. It is also compatible with the standards of ASTM D523, ASTM D2457. NHG268 conforms to JJG696 first class gloss meter working requirement, corresponding with CIE 1931(2°) under CIE C light source. NHG268 gloss meter can test material with a high gloss (0-2000Gu), and universally applicable..
- Product Code: Qnix 4600
QNix® 4600 – The coating thickness gaugeThe QNix® 4600 is a first-class measuring device that can easily keep up with its test objects thanks to its high speed of over 100 measurements per minute. The handy and ergonomic design of the device makes it the ideal choice for vehicle evaluation and secures it a pole position in terms of performance and ease of use. The practical one-button operati..
Reviews
There are no reviews yet.