This instrument is widely used to evaluate the adhesion of various coatings .A high precise machined wheel presenting 6 or 11 cutting blades with various spacing is mounted in a handle. The test is carried out by performing 2 series of crossed cuts at right angle. The obtained lattices is either brushed or cleared with adhesion tape. According to the coatings thickness and the related spacing, the results can be classified with reference to a standard scale. It has long life tool with 6 cutting edges and comfortable wood handle.
When applied to multi-coat system, assessment of the resistance to separation of individual layers of the coating from each other may be made.
The Cross Hatch Cutters conform with the requirements of：BS 3900 E6；BS/EN ISO 2409；ASTM D 3359 D 3302；
Main Technical Parameters
- Eight working side blades：When the blade edge is not sharp enough, users can loosen the boat type nut and top thrust screw to rotate it to achieve a new blade.
- Multi-cutting blades spacing：1mm/2mm/3mm
- The number of square：25squares/100squares
- Normal Packing List
- Carrying case
- Cross Hatch Cutter Handle
- 1 roll of 3M Scotch Transparent Tape
- Brush
- Magnifier
- Calibration Certificate
- Ordering Information
| Ordering Information | Teeth Amount | No. Of Cutting Edges | Cutter Spacing |
| BGD 502/2 | 11 | 8 | 1mm |
| BGD 502/3 | 6 | 8 | 1mm |
| BGD 502/4 | 11 | 6 | 2mm |
| BGD 502/5 | 6 | 8 | 2mm |
| BGD 502/6 | 6 | 8 | 3mm |
Related Products
NHG268 tri angle touch screen gloss meter features with 20, 60 and 85° angle, manufactured according to ISO2813 and GB/T 9754. It is also compatible with the standards of ASTM D523, ASTM D2457. NHG268 touchscreen glossmeter conforms to JJG696 first class gloss meter working requirement, corresponding with CIE 1931(2°) under CIE C light source. NHG268 touch screen gloss meter 2000gu can test..
Reviews
There are no reviews yet.