Universal Imput Tester

mpact test describes a method for evaluating the resistance of a dry film of paint,varnish or related product to cracking or peeling from a substrate when it is subjected to a deformation caused by a falling weight.
he coating under test is applied to suitable, thin（normally metal）panels. After the coating has cured, a standard weight is dropped on the each panel from a height that will cause deformation of the coating and the substrate. The test can be carried out with the coated side of the panel facing upwards（i.e.towards the falling weight）or downwards（i.e away from the weight）.By gradually increasing the height from which the weight drops, the point at which failure occurs can be determined.Films generally fail by cracking, which is made more visible by the use of a magnifier.
The test can be carried out：
—either as a “pass/fail” test, the test being carried out from one drop height and with a specified mass, so as to test compliance with a particular specification.
—or as a classification test, to determine, by gradually increasing the drop height and/or the mass, the minimum mass and/or drop height for which the coating cracks or peels from its substrate.
Biuged offers many different types impact testers according to different standards. These impact testers consist of a solid base with a guide tube support, some different weights hammers（falling weights）and some different diameters punches. Users can choose different size and weight hammer to simulate paint used different environments.

Main Technical Parameters

Ordering information → BGD 305 BGD 30

ISO Impact Tester

Features ◆ Latest design make changing punch,
weight and die become more
easy and faster. ◆ Ring slot for height limitation,
convenient for operator
to adjust different impact depth.
◆ The aluminum oxid guide
tube is produced by special
technology, never fade and rust. ◆ The aluminum oxid guide tube is
produced by special technology,
never fade and rust.
◆ Special structure design make
impact groove won’t deviate
forever, no calibration. ◆ Guide tube is produced by
special mould, the gap with
weight is controlled precisely.
◆ Come with Calibration Certificate. ◆ Come with Calibration Certificate.
Instrument scale length 0-100cm（40inch）
Graduation 1cm
Falling Weights 1000g（2 pcs） 1000g（2 pcs）
300g（1 pc） 2 lb（2 pcs）
Punch Diameter Ф 12.7mm（1/2 inch） Ф 20 mm
Ф 15.9mm（5/8 inch） Ф 15.9mm（5/8 inch）
Die inside Diameter Ф 16.3mm Ф 27mm
ф 31.75mm ф 16.3mm（41/64inch）
Standards ASTM D 2794 ASTM D 2794
ASTM D 3029 ASTM D 3029
ISO 6272.2 ISO 6272.1