Elcometer 270 Pinhole Detector

The Elcometer 270 range utilises the wet sponge technique and has been designed to set a new standard for wet sponge pinhole detectors – a high quality, low voltage detector with similar accessories to a high voltage spark tester.

Supplied ready to use

Automatic sensitivity calibration and voltage checks

Low battery indicator

Visual and audible alarms

Integral and separate wand functionality

A wide range of fully interchangeable wand accessories

Easy release snag proof cables

Large standard sponge

An inspection kit for all your requirements is available.

Model Elcometer 270/3 Pinhole Detector Elcometer 270/4 Pinhole Detector Certificate

Part Number D270—-3 D270—-4

Part Number with Certificate D270—-3C D270—-4C •

Voltage 9V and 90V 9V, 67.5V and 90V

Maximum Measurement Range 500µm (20mils) 500µm (20mils)

Sensitivity 9V: 90kΩ ±5%

90V: 400kΩ ±5% 9V: 90kΩ ±5%

67.5V: 125kΩ ±5%

90V: 400kΩ ±5%

Battery Life (continuous use) 9V: up to 200 hours

90V: up to 80 hours 9V: up to 200 hours

67.5V: up to 100 hours

90V: up to 80 hours

Battery Type 3 x AA (LR1600) 1.5V alkaline (NiMH rechargeable batteries can also be used, battery life will be reduced by up to 75%)

Accuracy of Setting ±5%

Dimensions Without Wand: 210 x 42 x 37mm (8.3 x 1.7 x 1.5”)

Standard Wand: 175mm (6.9”) long (including sponge)

Flat Sponge: 175mm (6.9”) long (including sponge)

Weight 610g (21oz) including wand, cable and batteries

Packing List Pinhole Detector, standard wand and flat sponge, 4m (13 2”) return lead with crocodile clip, 3 x LR1600 (AA) batteries and operating instructions

STANDARDS:

AS 3894.2, ASTM D 5162-A, ASTM G6, ASTM G62-A, BS 7793-2, ISO 8289-A, ISO 14654, JIS K 6766, NACE RP 0188, NACE SP 0188, NACE TM0384

Standards in grey have been superseded but are still recognised in some industries.

• Calibration Certificate supplied as standard