Lab BOD Incubator

This Lab BOD Incubator, GMP Model is made under GMP guidelines as per GMP Rules used for all pharmaceutical Co Microbiology Dept etc.

Technical Specifications:

• Double walled construction outer S.S304 dull Finish Inner S.S316 Mirror

• PUF insulation between two walled

• Full acrylic door permit inspection of specimen’s with out disturbing the temp

• Temp Controlled by PID Controller with auto tuning facility with accuracy of ±0.5 C .temp Range 5 C to 60 C accuracy ±0.5 C

• Illumination light are provided for viewing

• CFC free hermetically sealed compressor provide temp for below ambient condition

• Air circulation fan for marinating temp uniformity through out the chamber

• The chamber is provided with modular removable shelves made of S. S. for complete flexibility in use.

• To work on 230 volts 50 H2

Validation Protocols : IQ OQ PQ Documentation with calibration Tradability certificate of controller

Safety Care : Built in temp deviation audio visual alarm. Safety thermostat for over shoot temp. Cut off system HRC fuses for compressor heater main, time delay circuit for safety of compressor.